Lika CKP58 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 44

Lika CKP58 Скачать руководство пользователя страница 28

IP58, IQ58, IQ36

5 Programming interface

5.1 Configuring the encoder using the software tool

IP58/IQ58/IQ36 programmable incremental encoder is supplied with a software
expressly developed and released by Lika Electronic in order to easily programme
and configure the device. It allows the operator to set the working parameters
of the device and monitor whether the device is running properly. The program
is supplied for free and can be installed in any PC fitted with a Windows
operating system (Windows XP or later). The name of the program executable
file is

KIT_IP_IQ58_vx.x.exe

where vx.x is the release version of the file. The

program is available for download at the following address
https://www.lika.it/eng/products/rotary-encoders/incremental/%C3%B8-58-
%C3%B7-65-mm/programmable/ .
The program is designed to be installed simply by copying the executable file
(*.exe file) to the desired location and there is

no

installation

process. To launch

the program just double-click the file icon. To close the program press the

EXIT

button in the title bar.

WARNING

Please be aware that the following compatibilities between the hardware-
software version of the device and the software version of the executable file
have to be respected compulsorily.

Compatibility

HW

Connection kit

EXE FILE

IP58

1.0

KIT IP58

R1, R1_1

IP58, IQ58

1.0

KIT IP58, KIT IP/IQ58

From v2.0 up to …

IQ36

1.0

KIT IP58, KIT IP/IQ58

From v2.5 up to …

The new programming interface (from v2.0 release on) allows the connection to
both the IP58 series and the IQ58 series using either the KIT IP58 (if you already
have one) or the KIT IP/IQ58.
The programming interface (from v2.5 release on) allows also the connection to
the IQ36 series using either the KIT IP58 (if you already have one) or the KIT
IP/IQ58.
The older programming interface (R1, R1_1 releases) allows the connection to
the IP58 series only, using the KIT IP58.
In all cases you must comply with the hardware and software compatibility
indicated in the table.

MAN IP58_IQ58_IQ36 E 1.6

Programming interface

28 / 44

«
...
26
27
28
29
30
...
»

Содержание CKP58













































Отзывы:

Нет отзывов