Lightware UMX-HDMI-140 страница 52 Скачать руководство пользователя

Страница: 52 / 161

5. Software Control - Lightware Device Controller

UMX-HDMI-140 series– User's Manual

Applied firmware package: v1.3.0b5 | LDC software: v2.5.6b2

5.9.5.

Infra

ATTENTION!

The device has no built-in Infrared receiver and transmitter. For the complete usage attach

an IR emitter unit to the IR OUT and an IR detector unit to the IR IN connectors.

Infra-Red (IR) receiver and transmitter options can be found on this tab. There are three submenus are

available under it:

IR codes

Ports

, and

Clear all IR codes

#infra #infrared #ir

IR Codes

User can set the name of the IR code, the fingerprint (hash), and the repeat timeout in ms, as well as actions

can be ordered to each IR codes.

IR codes window in the Control menu

Description

Function

Code number.

Name

You can give an unique name for the desired code.

Fingerprint (hash)

Fingerprint code in pronto hexa format.

Detected

Indicator gives feedback about the given IR code is detected currently.

Repeat timeout (ms)

You can set a timeout to avoid the involuntary code recurrence.

Actions

Action buttons for the desired IR code:

Save

: saving the fingerprint.

Cancel

: canceling the fingerprint.

Learn

: learning the detected IR code.

Detected IR fingerprints

You can check the detected IR codes in this panel. Pushing

Clear

button

deleting all current fingerprints and switch on or off the automatic

scrolling with the

Autoscroll

pipe.

20 fingerprints can be stored in the device at the same time. Each of them can be ordered to an action in

Event Manager

Learning IR Code (hash)

Step 1.

Connect the IR detector unit to the IR IN port of the switcher.

Step 2.

Click on the

Learn

button on the

Infra

tab in the LDC.

Step 3.

Turn the remote controller to the IR detector. A pop-up window appears in LDC - press your remote

button to learn.

Step 4.

Once the code is received, a new window pops up in LDC - learning completed. Click

to continue.

Step 5.

Optionally type a unique name for the code in the

Name

text box. The default name is code#, e.g.

code0.

INFO:

UMX-HDMI-140 model can handle the IR codes in hash format.



 



Содержание UMX-HDMI-140


































































































































































Результаты поиска

Содержание UMX-HDMI-140

Отзывы:

Похожие инструкции для UMX-HDMI-140

Бренды по названию

Популярные бренды

Lightware UMX-HDMI-140, Руководство пользователя

Результаты поиска

Содержание UMX-HDMI-140

Отзывы:

Похожие инструкции для UMX-HDMI-140

Бренды по названию

Популярные бренды