Lightware UMX-HDMI-140 страница 19 Скачать руководство пользователя

Страница: 19 / 161

3. Installation

UMX-HDMI-140 series– User's Manual

Applied firmware package: v1.3.0b5 | LDC software: v2.5.6b2

3.1.

Mounting Options

To mount the switcher Lightware supplies optional accessories for different usage. There are two kinds of

mounting kits with similar fixing method. The switcher has two mounting holes with inner thread on the

bottom side; see the bottom view in the

Mechanical Drawings

section. Fasten the device by the screws

enclosed to the accessory:

Under-desk double mounting kit

1U high rack shelf

The Under-desk double mounting kit makes easy to mount a single device on any flat surface, e.g. furniture.

1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.

Pocket-sized devices can also be fastened on the shelf. To order mounting accessories please contact

[email protected]

WARNING!

Always use the supplied screws. Using different (e.g. longer) ones may cause damage to the

device.

INFO:

The switcher is half-rack sized.

3.1.1.

1U High Rack Shelf

Allows rack mounting for half-rack, quarter-rack and pocket sized units.

1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.

Pocket sized devices can also be fastened on the self.

3.1.2.

Under-desk Double Mounting Kit

The UD-kit double makes it easy to mount a single switcher on any flat surface (e.g. furniture).

INFO:

The chipboard screws are not supplied with the mounting kit.

3.2.

Electrical Connections

3.2.1.

12V DC Connection

Locking DC connector

Do not forget to turn the plug clockwise direction before disconnecting the power adaptor.

WARNING!

Always use the supplied 12V power adaptor. Warranty void if damage occurs due to use of a

different power source.



 



Содержание UMX-HDMI-140


































































































































































Результаты поиска

Содержание UMX-HDMI-140

Отзывы:

Похожие инструкции для UMX-HDMI-140

Бренды по названию

Популярные бренды

Lightware UMX-HDMI-140, Руководство пользователя

Результаты поиска

Содержание UMX-HDMI-140

Отзывы:

Похожие инструкции для UMX-HDMI-140

Бренды по названию

Популярные бренды