Lightware UMX-HDMI-140, Руководство пользователя

Страница: 53 / 161

5. Software Control - Lightware Device Controller UMX-HDMI-140 series– User's Manual 53
Applied firmware package: v1.3.0b5 | LDC software: v2.5.6b2
Ports Tab in UMX-HDMI-140-Plus
Infra tab - Ports Window - UMX-HDMI-140-Plus
The user can set the name and command injection port to each sources and destinations. For more details
about IR interface see the IR Interface section.
The following settings are also available:
▪ Port name;
▪ Enable / disable the port;
▪ Port number;
▪ Enable / disable command injection;
▪ Message sending function (little-endian pronto hex code). For more details see the Sending pronto
hex codes (Little-endian format) section;
▪ Reload Factory Default Settings.
Sending pronto hex codes (Little-endian format)
Copy the raw, little endian-format IR code into the
Send Pronto Hex
entry field and click the
Send
button.
The maximum length of the code can be 765 characters (765 bytes). For more details about the accepted IR
code formats, see Infrared Message Sending section.
This entry field does not store the code. The code can be saved into the action in the event manager with
the following parameters:
Category:
Infra;
Expression:
Send pronto hex
; Port:
D1;
Pronto hex:
<custom_code>
In the Event Manager, the maximum length of the code can be 184 characters (184 bytes).
INFO: Sending bigger endian-format code is available with LW3 protocol command, see Sending Pronto
Hex Codes in Big-endian Format via IR Port section.
Ports Tab in UMX-HDMI-140
User can set the name and command injection port to each sources and destinations. For more details
about IR interface see the IR Interface section.
Infra tab - Ports Window - UMX-HDMI-140
Clear all IR codes
Clicking on the button results deleting all stored IR fingerprints.
  
