Lightware UMX-HDMI-140 Скачать руководство пользователя

Страница: 157 / 161

11. Appendix

UMX-HDMI-140 series– User's Manual

157

Applied firmware package: v1.3.0b5 | LDC software: v2.5.6b2

11.10. Release Notes of the Firmware Packages

v1.3.0b5

Release date: 2021-04-22

New feature:

▪

Added IP port and services filtering (Advanced Control pack v3) for UMX-HDMI-140-Plus only!

▪

Added Macro capability (running partial device preset with tags) (Advanced Control pack v3) for UMX-

HDMI-140-Plus only!

▪

Added new method for CEC control button sendClick (Advanced Control pack v3) for UMX-HDMI-140-

Plus only!

▪

Added LMDMP (Lightware Multicast Device Management Protocol) feature.

▪

Modified DeviceLabel property default text to LW_<productname>_<serialnum>

▪

Added properties in root node: FirmwareVersion, PackageVersion, MacAddress.

▪

Minor performance improvements and modifications.

▪

Added Network HostName property (default: lightware-<serialnum>).

▪

Added new ConnectedSource property for media output nodes.

▪

Added AND operator for Event Manager Conditions (Advanced Control pack v3)

▪

Added Condition triggering for Event Manager (Advanced Control pack v3) for UMX-HDMI-140-Plus

only!

▪

Added Condition detect on property change to anything in Event Manager (Advanced Control pack v3)

▪

Added Variable handling for Event Manager (Advanced Control pack v3) for UMX-HDMI-140-Plus only!

▪

Added Permanent TCP clients with configurable target IP address, and Message recognizer for TCP

clients (Advanced Control pack v3) for UMX-HDMI-140-Plus only!

▪

Added LW3 command-salvo over Http POST (protocol.lw3) (Advanced Control pack v3) for UMX-HDMI-

140-Plus only!

▪

Added Http message sending with sendHttpPost and sendHttpPut (target server IP, target filepath,

header, body) (Advanced Control pack v3) for UMX-HDMI-140-Plus only!

▪

Added method to send Wake On LAN packet (Advanced Control pack v3)

▪

Added cleartext login function (disabled by default) (Advanced Control pack v3) for UMX-HDMI-140-

Plus only!

▪

Added MAC filtering (Advanced Control pack v3) for UMX-HDMI-140-Plus only!

▪

Added property to indicate FeaturePackVersion (Advanced Control pack v3)

Bugfix:

▪

Fixed issue with tick counter when the device is continuously operating for a very long time.

▪

Improved network compatibility with 10.x.x.x IP address range.

v1.2.0b12

Release date: 2019-04-05

New feature:

▪

Sending IR codes (SendProntoHex e.g. send max. 200 Byte IR code with Event Actions) for UMX-HDMI-

140-Plus only!

▪

CEC - sendCEC command (e.g. turn on the TV with Event Actions) for UMX-HDMI-140-Plus only!

▪

RS232 Minimal Recognizer for Cisco compatibility (Cisco Login) for UMX-HDMI-140-Plus only!

Bugfix:

▪

Condition link was broken is fixed.

▪

Notification message fixed - Use LDU2 v1.2.3 for the upgrade!

v1.1.1b8

Release date: 2019-01-14

New feature:

▪

Factory default values changed (Autoselect: enabled; Autoselect mode: Last detect)

▪

40 event can be saved in Event Manager

▪

Added 'User replaceable miniweb slot' to support built-in control webpage

▪

Firmware platform library updated

▪

Added 'Dark mode' function to turn off front panel LEDs

▪

Compatible for LDU2 only!

▪

Improved GPIO detection

▪

Modified DP input driver to fix HDCP issue with MacBooks

▪

Added 'Disable default button function' option to support button customizetion in Event Manager

▪

Modified RS-232 modes to support SendMessage in Control mode

▪

Added 'Forced button lock' function to lock buttons via protocol command

Bugfix:

▪

Message sending via an RS-232 Port is available in all RS-232 modes (Control mode/ Command

injection mode / Event manager mode).

▪

Fixed DP input cable adaptor detection.

Known issue:

▪

GPIO input polling time is slow, in spite of the correct operation, it may seem that the connected buttons

are not sensed



 



Содержание UMX-HDMI-140


































































































































































Результаты поиска

Содержание UMX-HDMI-140

Отзывы:

Похожие инструкции для UMX-HDMI-140

Бренды по названию

Популярные бренды

Lightware UMX-HDMI-140, Руководство пользователя

Результаты поиска

Содержание UMX-HDMI-140

Отзывы:

Похожие инструкции для UMX-HDMI-140

Бренды по названию

Популярные бренды