6. Software Control - Lightware Device Controller
UCX series – User's Manual
60
Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1
USB Hub Properties
Available settings and tools
General
Port name
The name of a port can be changed by typing the new name and clicking on the
Set
button. The following
characters are allowed when naming: Letters (A-Z) and (a-z), hyphen (-), underscore (_), numbers (0-9), and
dot (.). Max length: 63 characters.
Lock
#lock #unlock
The port can be locked to the currently connected output ports by putting the tick. If the port is locked, the
crosspoint state of this port cannot be changed.
Autoselect
#autoselect # usbautoselect
For more details about this feature see
section.
Autoselect settings:
Disable autoselect / Follow video / First detect / Last detect mode / Individual input
settings
Follow video (O1 or O2): Follow O2 means the same computer will be the video source for O2 output and
the USB Host of all USB downstream devices.
Video and USB ports either have a common USB Type-C connector for each port, or an HDMI and USB-B are
clearly marked to belong together as one port.
USB Devices
Power 5V Mode can be set for each port in the drop-down menu: When the option is
Off
the switcher does
not send device 5V over the USB-A port. Using
Auto
mode is recommended.
