6. Software Control - Lightware Device Controller
UCX series – User's Manual
63
Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1
6.8.4.
Creating an EDID - Easy EDID Creator
Since above mentioned Advanced EDID Editor needs more complex knowledge about EDID,
Lightware introduced a wizard-like interface for fast and easy EDID creation. With Easy EDID
Creator it is possible to create custom EDIDs in four simple steps. By clicking on the
Create
button below
Source panel,
Easy EDID Creator
is opened in a new window. For more details about EDID Editor please visit
our website (
and download the EDID Editor Application note.
EDID Creator Window
CREATE
6.9.
Control Menu
6.9.1.
Ethernet
Ethernet tab in Control menu
Five ports are displayed in the Ethernet settings: Three of them belong to the RJ-45 Ethernet connectors. You
can check the status of the Ethernet line by each ports: the speed and the duplexity of the connection. The
remaining two are for configuring the Ethernet layer in the USB-C ports.
The following settings are available for each ports:
▪
Rename the port
▪
Enable / disable the port;