Lightware UCX-2x1-HC30, Руководство пользователя

Страница: 103 / 167

7. Lightware REST API Reference UCX series – User's Manual 103
Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1
Change the Gateway Address (Static)
ɯ
header: POST·http:// <ip> /api/V1/MANAGEMENT/NETWORK/StaticGatewayAddress·HTTP/1.1
ɯ
body: <gw_address>
Apply Network Settings
ɯ
header: POST·http:// <ip> /api/V1/MANAGEMENT/NETWORK/applySettings·HTTP/1.1
Setting the Hostname
ɯ
header: POST·http:// <ip> /api/V1/MANAGEMENT/NETWORK/HostName·HTTP/1.1
ɯ
body: <unique_name>
Network Security
Enable/Disable Ethernet Port
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/ETHERNET/ <ethernet_port> /Enabled·HTTP/1.1
ɯ
body: <status>
Query Network Service Port Number
ɯ
header: GET·http:// <ip> /api/V1/MANAGEMENT/NETWORK/SERVICES/ <port> /Port·HTTP/1.1
Enable/Disable Network Service Port
ɯ
header: GET·http:// <ip> /api/V1/MANAGEMENT/NETWORK/SERVICES/ <port> /Enabled·HTTP/1.1
ɯ
body: <status>
Query the Username for Authentication
ɯ
header: GET·http:// <ip> /api/V1/MANAGEMENT/NETWORK/AUTH/USER1/Name·HTTP/1.1
Set Password for Authentication
ɯ
header: POST·http:// <ip> /api/V1/MANAGEMENT/NETWORK/AUTH/USER1/setPassword·HTTP/1.1
ɯ
body: <password>
Enable Authentication
ɯ
header: POST·http:// <ip> /api/V1/MANAGEMENT/NETWORK/SERVICES/ <port> /
AuthenticationEnabled·HTTP/1.1
ɯ
body: <status>
Serial Port Configuration
BAUD Rate Setting
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/SERIAL/ <serial_port> /Baudrate·HTTP/1.1
ɯ
body: <baudrate>
Stop Bits Setting
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/SERIAL/ <serial_port> /StopBits·HTTP/1.1
ɯ
body: <stopbits>
Query Data Bits
ɯ
header: GET·http:// <ip> /api/V1/MEDIA/SERIAL/ <serial_port> /DataBits·HTTP/1.1
Parity Setting
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/SERIAL/ <serial_port> /Parity·HTTP/1.1
ɯ
body: <parity>
Query the Serial over IP Port Number
ɯ
header: GET·http:// <ip> /api/V1/MEDIA/SERIAL/ <serial_port> /SERIALOVERIP/Port·HTTP/1.1
Enable the Serial over IP Port
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/SERIAL/ <serial_port> /SERIALOVERIP/Enabled·HTTP/1.1
ɯ
body: <state>
Serial Port Messaging
Sending a Message via RS-232
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/SERIAL/ <serial_port> /send·HTTP/1.1
ɯ
body: <message>
GPIO Port Configuration
Setting the Direction of a GPIO Pin
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/GPIO/ <port> /Direction·HTTP/1.1
ɯ
body: <dir>
Setting the Output Level of a GPIO Pin
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/GPIO/ <port> /Output·HTTP/1.1
ɯ
body: <state>
Setting the Output Level for a Specified Time
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/GPIO/ <port> /interval·HTTP/1.1
ɯ
body: <value> ; <time>
Toggling the Level of a GPIO Pin
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/GPIO/ <port> /toggle·HTTP/1.1
OCS Port Configuration
Querying the Input Level of an OCS Pin
ɯ
header: GET·http:// <ip> /api/V1/MEDIA/OCS/P1/InputLevel·HTTP/1.1
Set the Sensor Type
ɯ
header: POST·http:// <ip> /api/V1/MEDIA/OCS/P1/SensorType·HTTP/1.1
ɯ
body: <sensor_type>
Querying the Reported OCS State
ɯ
header: GET·http:// <ip> /api/V1/MEDIA/OCS/P1/State·HTTP/1.1
   