Lightware UBEX Series, Руководство пользователя

Страница: 21 / 201

2. Product Overview UBEX series – Matrix Application Mode – User's Manual 21 2. Product Overview UBEX series – Matrix Application Mode – User's Manual 21
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
2.3. Front and Rear View - UBEX-MMU-X200
2.3.1. Front View
1
Control Ethernet
port 1
Front panel RJ45 connector for control and firmware upgrade purpose. The port
supports 100 Mbps Ethernet connection, auto-negotiation, and auto-MDI/MDIX.
See the details about the cable wiring in the Ethernet Connectors section and
the concept of the operation in the Ethernet Interface section.
2
Status LEDs The LEDs give immediate feedback about the recent status of the device. See
the details about the operation of the LEDs in the Status LEDs section below.
3
LCD screen LCD screen showing the most important settings and parameters in the front
panel menu. See the details the LCD menu operation in the Front Panel LCD
Menu Operation - MMU chapter.
4
Jog dial control
knob
Easy setting and menu navigation by the jog dial control. Keep dial and click
while getting feedback on the LCD. See the details the LCD menu operation in
the Front Panel LCD Menu Operation - MMU chapter.
5
Reset button Reboots the device (the same as disconnecting from the power source and
reconnecting again).
6
USB connector Function will be added by future firmware update.
Status LEDs
LIVE
blinking The device operates normally, the core software is running.
on Device initialization is in progress.
off The device is not powered or out of operation.
POWER
on The device is powered and ready to use.
off The device is not powered or out of operation.
UBEX-MMU-X200
Matrix Management Unit
Control USB
Reset
CONTROL
ETHERNET 1
3 4 1 2
5 6
2.3.2. Rear View
7
RS-232
connectors
2 pcs 3-pole Phoenix connectors for serial communication. The connectors are
for controlling the device and connection with third-party system controllers.
See more details about the pin assignment in the RS-232 Connector section,
about the cable wiring in the Cable Wiring Guide for Serial Data Transmission
section, and the concept of the operation in the Serial Interface section.
8 Control Ethernet
port 2
Rear panel RJ45 connector for control and firmware upgrade purpose. The port
supports 1 Gbps Ethernet connection, auto-negotiation, and auto-MDI/MDIX.
See the details about the cable wiring in the Ethernet Connectors section and
the concept of the operation in the Ethernet Interface section.
9
Ethernet port
for UBEX
network
RJ45 connector with 1 GbE support for connection to the UBEX network.
Connect the MMU and the L3 network switch by a CATx cable via the connector.
See the details about the cable wiring in the Ethernet Connectors section.
Use one of the UBEX network connectors (RJ45 or SFP) only in the same time to avoid
the network loop!
q SFP slot for
1 GbE SFP
module for
UBEX network
Optical port slots for an 1 GbE SFP module for connection to the UBEX network.
Connect the MMU and the L3 network switch by LC fiber optical cable or DAC
cable. Ports can be used for either singlemode or multimode fiber optical
connections. See more details about the SFP interface in the SFP / SFP+
Interfaces section.
Use one of the UBEX network connectors (RJ45 or SFP) only in the same time to avoid
the network loop!
w AC connector Standard IEC connector accepting 100-240 V, 50 or 60 Hz. See more details
about it in the AC Power Connection section.
8
9 q
w 7

  

  