Lightware UBEX Series, Руководство пользователя

Страница: 19 / 201

2. Product Overview UBEX series – Matrix Application Mode – User's Manual 19 2. Product Overview UBEX series – Matrix Application Mode – User's Manual 19
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
2.2. Front and Rear View - R-series Endpoint Devices
2.2.1. Front View
All Models
1 Mounting ears Durable mounting ears on both sides of the device for the easy mounting in the
case of rental or staging application. The ears serve more purposes, see the
details in the Mounting Options - R-series Endpoint Devices section.
2
Status LEDs The LEDs give immediate feedback about the current status of the endpoint
device. See the details about the operation of the LEDs in the Status LEDs section
(on the right side).
3
LCD screen LCD screen showing the most important settings and parameters in the front panel
menu. The available settings and information depends on the current application
mode. See the details in the Front Panel LCD Menu Operation - Endpoints chapter.
4
Jog dial
control knob
Easy setting and menu navigation by the jog dial control. Keep dialing and click
while getting feedback on the LCD.
5 Reset button Reboots the device (the same as disconnecting from the power source and
reconnecting again).
3 2 5
1 1
4
Status LEDs
LIVE Transmitter / Receiver / Transceiver
blinking The device is powered and ready to use.
off The device is not powered or out of operation.
STATUS Transmitter / Receiver / Transceiver
on All measured temperature and voltage values are within the limits.
blinking Measured temperature or voltage value is out of the limits.
off The device is not powered or out of operation.
LINK OK Transmitter / Receiver / Transceiver
on
The connection is established on the fiber optical links and the Link Aggregation is
working.
blinking
The connection is established on the fiber optical links and LACP detection period is
active.
off No connection is established on one of the fiber optical links.
MMU AVAILABLE Transmitter / Receiver / Transceiver
on
Matrix mode is active; the communication is live between the endpoint and the Matrix
Management Unit (MMU).
blinking Matrix mode is active; no communication between the endpoint and the MMU.
off Extender mode is active; no communication between the endpoint and the MMU.

  

  