Lightmed LightLink-CXL, Руководство по обслуживанию

Страница: 82 / 99

LightLink-CXL – Service Manual Rev. No. : 01 Page 81 of 98
Do not tip over the LightLink-CXL during cleaning, as this may increase the risk of the
cleaning solution going into the device, resulting in damage and a safety electrical risk.
The LightLink-CXL cannot be placed in autoclave.
When a liquid is spilled on the LightLink-CXL the device should be cleaned immediately
with an appropriate lint-free absorbent cloth. After cleaning, check that there is no liquid
in the electrical socket. The liquid may cause short circuits in the contacts. Clean the
electrical socket with a wad of cotton and wait one hour before connecting the
LightLink-CXL to the electrical outlet.

The LightLink-CXL must be turned off and unplugged from the electrical outlet when
it is cleaned. After cleaning the device wait at least 1 minute before plugging the
LightLink-CXL to the electrical outlet.

The LightLink-CXL is a high-precision equipment and so it is absolutely necessary that
all possible care is taken during cleaning.
8.3 Repairs
To ensure a long and useful life to your medical equipment, LightMed recommends that
the LightMed Authorized Service distributor or your Technical Assistance own
periodically check the condition of the device and replace parts as needed.
In the case of any defect in the LightLink-CXL immediately consult the LightMed
Authorized Distributor. The right to repair the LightLink-CXL or perform regular
maintenance or replacement of spare parts is reserved for the LightMed Authorized
distributor or the manufacturer.
8.4 Periodic Maintenance
LightMed Corp. recommends periodic INSPECTIONS every year, which should include
verifying the software and adjustments and calibrations of the systems of mechanical
and electronics.