Lighthouse REMOTE Active Count, Руководство по эксплуатации

Страница: 22 / 62

Lighthouse REMOTE Active Count Installation Guide
3-8 248083401-1 Rev 5
13. Pull on the cable to bring the RJ-45 into the connector housing.
Make sure to squeeze the latch tab to allow it to enter the slot in the
housing. See Figure 3-8.
Figure 3-8 Close-up of RJ-45 Latch
14. Push the RJ-45 connector fully into the housing and insert the Lock
Clip, round edge out, as illustrated in Figure 3-9.
Figure 3-9 Lock Clip Installation
15. Hand tighten the housing cable clamping nut until snug
See Figure 3-10.
Figure 3-10 Tighten Cable Clamp Nut