27
l
English/Metric Default Setting Toggle
The default setting of the
Lifecycle 6500HR
aerobic trainer display console is set to
English units of measurements at the factory. If your display console will require units of
measurements to be in metric, it may be necessary to change the setting from english
to metric. To do so, you will need to enter into the diagnostic programs and proceed to
Diagnostic State 8
. To do so, follow the instructions as listed below.
1. Press, and continue to hold, the
5
key on the keypad and then press
START
while
pedaling the bike over 55 RPM.
On entry, all LEDs and 7-segment displays will be on. You are now in
Diagnostic
State 1
.
2. Press the
START/ENTER
key seven times to forward to
Diagnostic State 8
and
choose the english or metric default setting.
This test indicates the display console default setting of english or metric units of
measurements.
When the default is set to english units of measurements, it will read
E
in the
DATA ENTRY WINDOW.
When the default is set to metric units of measurement, it will read
9
in the DATA
ENTRY WINDOW.
3. Press the'
5
' key to change the default setting of the system. The system will toggle
from an
E
to
9
to
E
condition by continuing to press the '
5
' key.
4. Diagnostic State 7
can be entered now by pressing the
CLEAR/PAUSE
key and
you can continue going backwards to previous Diagnostic States by pressing the
CLEAR/PAUSE
key until you return to the user display.
In
ALL DIAGNOSTIC STATES
, the user must keep pedaling the bike. If the pedal
RPM drops too low, the bike will shut down, requiring at least 40 RPM or greater
and the START switch pushed to operate again.
All manuals and user guides at all-guides.com
Содержание Lifecycle 6500HR
Страница 4: ...4 All manuals and user guides at all guides com...
Страница 36: ...36 All manuals and user guides at all guides com a l l g u i d e s c o m...
Страница 37: ...OPERATION MANUAL All manuals and user guides at all guides com...
Страница 38: ...10601 West Belmont Avenue Franklin Park IL 60131 All manuals and user guides at all guides com...
