LifeCore Fitness LC-1050RBs, Руководство пользователя

Страница: 21 / 30

Page | 20
Heart Rate Monitoring Devices
Pulse Hand Grips (Standard)
The 1050RBs comes standard with stainless steel pulse handgrips. To activate, gently grasp both
handgrips to obtain a heart rate reading. Hold on to the hand grip for a few seconds until the
computer is able to calculate your pulse and get a steady reading. Once you let go of the hand grips
the computer will need to recalculate your pulse.
Note: It is recommended to wear a chest strap for the Heart Rate control programs, as it is more
accurate and will constantly transmit a signal to the computer. If you wear a chest strap and use the
steel pulse handgrips at the same time, please note the console will take the measurement of the
chest strap and not the handgrips.
Operating Tips:
If you are not getting a consistent reading while using the hand pulse option, we recommend the
following suggestions:
• Make sure that the palms of the hands are touching the contact area of each hand pulse grip.
• Maintain an even pressure on the grips.
• Do not hold the hand pulse grips too tightly.
• In some cases dampening your palms may help the sensors register a more stable heart rate.
Chest Strap (Standard)
The 1050RBs is equipped with a built-in wireless 122k receiver for your chest strap for your heart
rate monitoring transmitter. Please contact your dealer to purchase a compatible 122k chest strap
transmitter, if you would like to use more wireless heart rate features.
To get an accurate reading using these devices, you will need to be within three feet of the console,
and a minimum of four feet from others using a heart rate monitoring device.
The receiver of the wireless ECG system is built into the console unit.
How to Wear Your Sensor/ Transmitter: