LifeCore Fitness LC-1050RBs, Руководство пользователя, Страница: 14 / 30

Page | 13
2. DISPLAYS
A. Dot Matrix Profile Window :
Displays program profile during program setting and executing. The program profile will be different
according to which program is selected.
There are 15 columns of LED representing 15 segments of time; each time segment will represent or
equal
= total program time divided by 15 columns. During a workout, a column of LED will blink to
indicate the time segment you are currently in during that point in time.
There are also 8 rows of LED representing 16 levels of resistance. Each LED row represents 2
levels of resistance and during a workout; a column(s) or LCD will blink to indicate the resistance
level you are currently in during that point in time. In the data display “Load” will also indicate level of
resistance. The appropriated row of LED will light up when you adjust the resistance level.
B.
Data Display Windows :
There are 6 data display windows displaying calories, time, speed/RPM, pulse, distance and
watt/level. While setting up a program, the appropriated data window will blink to indicate which data
you are currently setting. Press
c
/
d
keys to adjust the value and press the ENTER key to confirm
the value.
Note:
I. Because speed/RPM & watt/level readings share a data display window, each value will be
displayed for 5 seconds then alternate during the entire workout.
II. The default value setting will be updated to the last setting if it has not been changed.
Pressing & holding the RESET key for a couple of seconds will reset the values back to
factory default settings.
III. Setting a number other than 0 in those display windows will count the number down. If data
display setting is set at 0, the reading will count up.
C.
User Profile Setting Indicators :
During user profile setting, the appropriate LED will light up to indicate which setting is selected.
Press the ENTER key to confirm selection or
c
/
d
key to change the selection then press ENTER.
D.
Program Category Selecting Indicators :
During program category selection, the appropriate LED will light up to indicate which category is
selected. Press the
c
/
d
key to change the selection and then press the ENTER key to confirm the
category selection. There are 5 program categories: manual, program, watt, user setting and H.R.C.
E.
H.R.C. Program Indicators :
During H.R.C. program selection, each LED will light up to indicate which H.R.C. program is selected.
Press the ENTER key to confirm the program selection or
c
/
d
key to change the selection. There
are 4 H.R.C. programs: TAG (target), 90%, 75% & 55%.