LifeCore Fitness LC-1050RBs, Руководство пользователя, Страница: 10 / 30

Page | 9
Step 8: Stop Bar Assembly
Tools Needed:
4mm Allen wrench
Note: Apply blue loctite to the threads of
each bolt.
A. As shown in Figure 8) Insert the stop bar
(H3) into the receiver on the seat
assembly. Position the flat portion of the
stop bar towards the screw holes. Use a
4mm Allen wrench to tighten two screws
(A23) firm.
How to Adjust the Seat Frame Assembly
Pull up on the stop bar (H3) to unlock seat
frame assembly, slide the seat frame
assembly to the desired position. Push down
on the stop bar to lock in place.
Step 9: Seat Pad Assembly
Tools Needed:
6mm Allen wrench
A. As shown in Figure 9) Locate and secure
the seat pad (H7) to the seat frame.
Locate and hand tighten Qty. 4 bolts (J6)
and washer (J6) to the bottom of the seat
frame. Position the seat as straight as
possible and then use a 6mm Allen
wrench to tight bolts.