LI-COR LI-600, Инструкция по эксплуатации

Страница: 47 / 131

LI-600 Porometer/Fluorometer Instruction Manual
5-6
Number : Check the Auto-Increment box for automatic
numbering.
List : Add up to three selections with the plus button;
drag and drop them to change their order.
Barcode : Enable the barcode scanner.
Automode Setup
In Automode Setup , select Automode, gsw , and/or F
(fluorometer).
Select Automode to access the gsw and F variable
options. At least one variable must be selected to enable
Auto Mode.
Figure 5-4 . Automode Setup screen.
Then select the variables ( gsw, F , or both), then a Preset
(Fast, Medium, or Custom). If selecting Fast or
Medium: the Stability Limit (
gsw- specific option), Slope
Limit (F-specific option), and Period over which to cal-
culate the change are automatically determined. If select-
ing Custom, you can set Stability Limit, Slope Limit,
and Period (1, 2, or 4 seconds). (See
Table 5-1 below.)
Preset
Stability Limit
(g
sw
)
Slope Limit
(F) Period
(s)
Fast 0.005 5 2
Table 5-1 . Automode Setup variable options.