LGMG MT86H, Руководство по эксплуатации и обслуживанию

Страница: 67 / 165

MT86H Operation and Maintenance Manual
59
fit a new filter, clean up the fitting surface
first, fill the filter full with clean media
to be filtered, lubricate the rubber seal ring
with little clean media to be filtered, then
install the filter by hand and screw it for 3/4
circle after the sealing surface bonds with
fitting surface. Start the engine to check if
the sealing surface is leaking oil, and if any,
tighten the filter again until there is no oil
leaking any more.
3) Fuel filter
The replacement interval and replacement
method are the same with “2) Oil filter”.
4) Fuel primary filter
The replacement interval and replacement
method are the same with “2) Oil filter”.
4.1.3 Routine maintenance and
considerations
1) Check the coolant level, oil level and fuel
level.
2) Check if the grease is sufficient at
required position.
3) Check for oil, water and gas leakage.
4) Check connection of external connection
pieces and accessories.
5) Check if the fan belt is too tight or too