LGMG MT86H, Руководство по эксплуатации и обслуживанию

Страница: 114 / 165

MT86H Operation and Maintenance Manual
106
steering cylinder). L opening is connected
with the rod cavity of the left steering
cylinder (the rodless cavity of the right
steering). The steering gear T opening is
connected with the oil return opening of the
hydraulic oil tank.
3) Full-hydraulic steering system maintenance
a. Check the oil level in the hydraulic oil tank:
First, clean the oil tank and periphery to
prevent dirt contamination. During inspection,
pay attention to the scale on the oil level
gauge. When engine is running, the hydraulic
oil level is even with the central scale of oil
level gauge; when engine does not work, the
hydraulic oil level will be a little higher
than the central scale.
b. It is required to change hydraulic oil for
a new vehicle after it runs 2500km, and
meanwhile clean the filter element. Change
hydraulic oil every 10000km or every year
thereafter.
c. Check oil level every week, and check the
cleanness of hydraulic oil.
d. The method of oil change is as follows:
① Support front shaft;
② Unscrew oil filling breather filter;
③ Start engine, run it at idle speed for 10s,