LGMG MT86H, Руководство по эксплуатации и обслуживанию

Страница: 54 / 165

MT86H Operation and Maintenance Manual
46
Fig 3-48 Transmission gearshift lever
Fig 3-49 Differential lock button
will be cut off for exhaust braking.
The engine may be overheated after it runs
overloaded, and in this case, the engine should
be shut down after running at idle speed for
2-3 min.
3.7 Start-up and gearshift
△
! WARNING：The user is asked to drive
the vehicle according to the
instructions, and the user is conceited
for all the consequences of the illegal
driving.
3.7.1 Start ‐ up
If the engine is started, and the low pressure
indicator is on and the buzzer keeps sounding,
do not release the brake handle to start the
vehicle until the inflation pressure reaches
0.55 MPa (5.5 bar), low pressure alarm
indicator is off and the buzzer stops sounding.
△!WARNING: Always start the MT86 mining dump
truck at gear 1.
3.7.2 Transmission gears and operation
See "4.4 Operation and maintenance of
transmission" for details.
3.7.3 Differential lock