LG PAHCNM000, Инструкция для владельца и по установке

Страница: 17 / 51

INSTALLATION AND WIRING METHOD (OPTIONAL)
17
ENGLISH
CAUTION
!
• When adding more than one EEV module, check if the power and communication cables
are connected correctly.
Otherwise, the product will not work properly.
• After adding EEV module, set the SW2 address. Otherwise, the product will not work
properly.
• Inverter Drive kit’s BUS A and B must be wired in the last EEV add-on module.
1. Pull the supporter of the EEV module to
both sides.
2. Using holes inside of AHU CONTROL KIT,
M4 screws(2EA) and extended supporter’s
holes for Installation.
<Ex : When add 3EA more EEV module>
RS4
8
5
BUS
A
(In
v
e
rt
er Driv
e kit)
RS4
8
5
BUS B
(In
v
e
rt
er Driv
e kit)
12 V 12 V 12 V
GND GND GND
Main module
<Wiring diagram>
<UI module> <UO module> <EEV module>
Wiring method when adding EEV module.
INSTALLATION AND WIRING METHOD
(OPTIONAL)
Installation method when adding EEV module
Ex : Installation method when additional EEV module required.