LG P930, Руководство пользователя

Страница: 28 / 232

26 26
Safety Guidelines
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the
Government’s Requirements for
Exposure to Radio Waves.
Your wireless phone is a radio transmitter
and receiver. It is designed and
manufactured not to exceed the emission
limits for exposure to radiofrequency (RF)
energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
These limits are part of comprehensive
guidelines
and establish permitted levels of RF
energy for the general population. The
guidelines are based on standards that
were developed by independent scientific
organizations through periodic and
thorough evaluation of scientific studies.
The standards include a substantial safety
margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile
phones employs a unit of measurement
known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6
W/kg. * Tests for SAR are conducted using
standard operating positions specified by
the FCC with the phone transmitting at its
highest certified power level in all tested
frequency bands.
Although SAR is determined at the
highest certified power level, the actual
SAR level of the phone while operating
can be well below the maximum value.
Because the phone is designed to operate
at multiple power levels to use only the
power required to reach the network, in
general, the closer you are to a wireless
base station antenna, the lower the power
output.
Before a phone model is available for
sale to the public, it must be tested and
certified to the FCC that it does not exceed
the limit established by the government
adopted requirement for safe exposure.
The tests are performed in positions and
locations (e.g., at the ear and worn on
the body) as required by the FCC for each
model.
The highest SAR value for this model
phone when tested for use at the ear is
0.67 W/kg and when worn on the body,
as described in this user’s manual, is
1.12 W/kg. (Body-worn measurements differ among phones models, depending
upon available accessories and FCC/
IC requirements.) While there may be
differences between SAR levels of various
phones and at various positions, they all
meet the government requirement for safe
exposure.
The FCC has granted an Equipment
Authorization for this model phone with
all reported SAR levels evaluated as in
compliance with the FCC RF emission
guidelines. SAR information on this model
phone is on file with the FCC and can be
found under the Display Grant section
of http://www.fcc.gov/oet/ea/fccid after
searching on FCC ID: BEJP930.
Additional information on Specific
Absorption Rates (SAR) can be found on
the Cellular Telecommunications Industry
Association (CTIA) website at http://www.
ctia.org/
* In the United States and Canada, the
SAR limit for mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard
incorporates a substantial margin of
safety to give additional protection for the
public and to account for any variations