Operation and settings
25
Sensor & Relay
Sensor
>
Enable: Marks up when you want to activate the sensor.
>
Alias: Displays the sensor name.
>
Type: Select the sensor type.
Relay
>
Control duration: Enter the relay time.
>
Alias: Displays the relay name.
>
Type: Select the relay type.
>
Control relay
-
Run: Click to activate the relay.
-
Stop: Click to stop the relay.
• Save: Click this button to confirm the settings.
Motion Detect
Preview
You can preview the motion detection window on the preview window.
General
>
Sensitivity: Enter the sensitivity to detect an object in motion.
• Save: Click this button to confirm the settings.
How to set the motion detect window
1. Click the [Add] button. The motion detect window is displayed.
You can add the three windows maximum for motion detection
area.
2. Set the [Sensitivity] option.
3. Click the edge or corner of the window box to adjust the window
size for motion detection.
4. Click the [Save] button to save the settings.
Note:
• Created motion detection area window will be applied for the same
sensitivity at once.
• Increase the sensitivity in the environment with a low lighting
condition or a few motion. On the contrary, in the environment with a
high lighting condition or a lot of motion, decrease the sensitivity.
• The Motion Detection function may not work depending on your
installation environment.
• Motion Detection settings area is not maintained by the screen
change by the operation of Pan / Tilt / Zoom. When reset the Pan
/ Tilt / Zoom, you need to reset the Motion Detection settings area
also.
• You can reset the window size. Click one of the window edge or
corner and drag & drop to reset the motion detection area.
• Motion Detection can be activated when at least one of channels is
enabled, Video codec is set to H.264 and GOP size is more than 2.
Содержание LNB5220
Страница 35: ......
