LG LNB5220, Руководство пользователя

Страница: 16 / 35

16
Operation and settings
SmartIR (Applicable model: LND5220R / LNV5320R / LNU5320R)
> Mode
- Auto: When the [Day/Night] menu set to [Night] mode, the
brightness of the IR LED will be adjusted automatically. The
[Max Level] is displayed.
- Manual: When the [Day/Night] menu set to [Night] mode,
the brightness of the IR LED will be fixed.
- Off: When the [Day/Night] menu set to [Night] mode, IR LED
will be turned off.
> Max Level: If the [Mode] option set to [Auto], can be adjust the
maximum brightness of IR LED.
Note:
When set the [IRIS] to the [Manual], the [Auto] mode is
deactivated.
> Level: If the [Mode] option set to [Manual], can be adjust the
fixed brightness of IR LED.
• Default: Click this button to restore the IP device back to original
factory settings.
Image
> Noise Reduction: If pictures are not clear due to noise, this option
would reduce the noise of picture. When you use this function,
the afterimage may occur.
> Color Saturation: Set the intensity of the color.
> Sharpness: The degree to which the boundary of the two
portions is clearly distinguished. If you set the sharpness value to
higher, the image outline becomes sharp. If you set to lower value,
the image outline becomes dim.
> Privacy Mask
- Add: Click the [Add] button.
1. When you click on the preview screen, yellow cross point
is displayed.
2. When you select all of 2 points, area is set automatically.
Note:
• You can cancel the point by click the mouse right button
near the other point.
• Up to 4 zone is available to set.
- Delete: Delete the selected zone.
- Delete All: Delete all of the mask zone.
- Save: Save the settings of the Privacy Mask.
Note:
• If the privacy mask setting is changed , it is not applied
immediately. You need to click the [Save] button to save the
settings.
• When the [Image] tab is selected, the Privacy Mask area is
displayed on the preview window.
• Set the [Privacy Mask] after complete the [Install] settings.
• Privacy Mask settings area is not maintained by the screen
change by the operation of Pan / Tilt / Zoom. When reset
the Pan / Tilt / Zoom, you need to reset the Privacy Mask
settings area also.
• If the [D-Effect] is changed, the [Privacy Mask] settings will
be initialized.
• Default: Click this button to restore the IP device back to original
factory settings.