12
Operation and settings
Note:
•
FPS maximum value cannot exceed the value of Sensor
Framerate.
•
Pivot, Video out, Max Stream Count are limited, depending on
the Install Preset setting.
•
You need to reset the Motion Detect and Smart Analytics in
Event menu every time Pivot Mode is selected or deselected.
>
D-Effect: You can select the digital effect.
-
Mirror: Turn on the mirror effect.
-
V-Flip: Flip the picture vertically.
Note:
•
Video codec settings should be set to H.264 or
H.264_HIGH to operate the Pivot function.
•
The [Mirror] and [V-Flip] function can be selected at once.
•
In the [Pivot] mode, the Text Overlay is rotated 90 degrees
counterclockwise to the output. It is not affected of the
Mirror and V-Flip.
•
Install settings will be updated at the time of entering the
Install tab.
• Save: Click this button to confirm the settings.
• Default: Click this button to restore the IP device back to original
factory settings.
Focus (Applicable model: LNB5220 / LNB5320)
Focus (Applicable model: LNV5320R)
Focus (Applicable model: LND5220R / LNU5320R)
>
Auto (
Applicable model: LNB5220 / LNB5320
): Select [Auto]
option on the [Focus] menu, then select the following mode.
-
Focus Push: This function will be activated automatically to
adjust the focus.
-
Focus Reset: The focus position is located at factory default
position.
-
Manual: Use , , , , or button to adjust the focus
position manually.
Note:
•
When you mount the lens, press [Focus Reset] button to
reset your focus.
•
After adjusting the focus approximately,
press [Focus Push] button to adjust the lens sharply into
focus.
>
Mode (
Applicable model: LND5220R / LNV5320R /
LNU5320R
): Select [Mode] option on the [Focus] menu, then
Содержание LNB5220
Страница 35: ......
