3. TECHNICAL BRIEF
- 9 -
LGE Internal Use Only
Copyright © 01 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
3.2.8 Sysclock Switching
Figure 3.2.4 PMU, CGU and External Reset
The PMU controls the rf_sysclk_en signal of the DCXO in the RF macro. During startup the PMU enables the
DCXO. After the system is running the DCXO is controlled by the SCU of the baseband by using the
vcxo_enable signal. This is handled by a dedicated logic in the PMU, see Figure 21. As long as
rf_sysclk_en_pmu, the output of the PMU state-machine is high, vcxo_enable controls the rf_sysclk_en signal
to the RF. If rf_sysclk_en_pmu is low, the DXCO is switched off, independent from vcxo_enable.
ͽͶ͑ͺΟΥΖΣΟΒΝ͑ΆΤΖ͑ΟΝΪ
ZWVX[^
resetout_o
reset_postscu_n_o
reset_pmu_n_o
reset_pmu_n_o
lsoation
&LS
reset for external
components
input to system
control unit
for example µC
reset
open drain
pad driver
0k
ESD
ESD
VDD_VRTC
VDD_VDIG1
VPMU voltage domain