LG LG-T370, Руководство по обслуживанию

Страница: 145 / 166

- 145 -
LGE Internal Use Only Copyright © 01 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12.AUTO CALIBRATION
11. AUTO CALIBRATION
11.5 AGC
This procedure is for Rx calibration.
In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the
result window will show correction values per every power level and gain code and the same
measure is performed per every frequency.
11 6 APC 11.6 APC
This procedure is for Tx calibration.
In this procedure you can get proper scale factor value and measured power level.
11.7 ADC
This procedure is for battery calibration This procedure is for battery calibration.
You can get main Battery Config Table and temperature Config Table will be reset.
11.8 Target Power
High Middle Low Description BAND
32 5 dBm 32 5 dBm 32 5 dBm Max power
914.8 MHz 897.4 MHz 880.2 MHz Frequency
124 37 975 Channel
EGSM 900
32.5 dBm 32.5 dBm 32.5 dBm Max power
848.8 MHz 836.8 MHz 824.2 MHz Frequency
251 191 128 Channel
GSM 850
1909.8 MHz 1880 MHz 1850.2 MHz Frequency
810 661 512 Channel
PCS 1900
29.5 dBm 29.5 dBm 29.5 dBm Max power
1784.8 MHz 1747.6 MHz 1710.2 MHz Frequency
885 699 512 Channel
DCS1800
32.5 dBm 32.5 dBm 32.5 dBm Max power
ͽ͸Ͷ͑ͺΟΥΖΣΟΒΝ͑ΆΤΖ͑΀ΟΝΪ
X[ZVX[^
29.5 dBm 29.5 dBm 29.5 dBm Max power
12.5 AGC
12.6 APC
12.7 ADC
12.8 Target Power