LG LG A1C-V5 Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 108

background image

Electronics

AC Module System Installation Manual

Copyright © 2020 LG Electronics.

All Rights Reserved.

11

Rev. 1.0

3 Installation

3-1 Instructions before Installation

• LG AC module is a “Grid Support Utility Interactive Inverter”, which requires approval from the

corresponding authority prior to connection with the utility grid. Contact the applicable local

government agencies and/or utility company.

•

Installation, maintenance, and supervision may only be carried out by a qualified and authorized

installer to ensure the safety of workers and systems.

•

Read and follow the installation guidelines specified in this manual. Installation with unapproved

methods may result in injuries including fatal injuries and/or damage to the equipment.

•

If it is necessary to use an installation method which is not specified in the installation manual,

please contact LG Electronics. Failure to comply may void the warranty and the module certificate.

• After arrival of AC modules, check for possible damage during transportation. Damaged modules

should not be installed. Request an exchange by contacting LG Electronics.

•  Secure all necessary permits and licenses to install the solar modules.
•  Store the AC modules in original packing before installation.
•  Keep the AC modules in a clear and secured area. Any particles or moisture may cause malfunction

of AC cable’s contactors.

•  Consider the weight of AC module before installation.
•  Do not work alone. Install AC modules with a team of at least 2 persons for safe installation.
•  To prevent the risk of accidents, use proper PPE (Personal Protective Equipment) including

helmets and gloves at all times.

• If installation location is high above ground, make sure to use Fall Protection System during the

installation.

• Plan the installation work in moderate weather. There is a risk of electric shock when it is raining

or snowing.

• Partial shadowing may substantially reduce energy production.
•

Check whether all parts used for the installation are certified for outdoor usage.

•  Keep the solar module and system away from children at all times.
•  During the AC module installation, do not let children play near the module and the system.
•  Care must be taken to avoid low tilt angles which may cause dirt to buildup on the glass. A buildup

of dirt may cause performance degradation.

•

Dirt build-up on the surface of the panel may cause active solar cells to be shaded and electrical

performance to be impaired.

• Carry out the installation according to the local electric code.

«
...
9
10
11
12
13
...
»

Содержание LG A1C-V5 Series













































































































Отзывы:

Нет отзывов

Похожие инструкции для LG A1C-V5 Series

Бренд: Datavideo Страницы: 18

Бренд: Hama Страницы: 9

Бренд: Hama Страницы: 10

Бренд: Hama Страницы: 12

Бренд: K&S BASIC Страницы: 17

Бренд: matson Страницы: 11

Бренд: Wacker Neuson Страницы: 36

Бренд: CableTronix Страницы: 5

STEVAL-CTM004V1

Бренд: STMicroelectronics Страницы: 40

Бренд: M-system Страницы: 3

Бренд: Harman Страницы: 8

Бренд: Haivision Страницы: 16

MOVIDRIVE DFC11A

Бренд: SEW-Eurodrive Страницы: 24

Бренд: KEB Страницы: 16

Бренд: Sunforce Страницы: 8

Бренд: Space Television Страницы: 6

Бренд: Z3 Technology Страницы: 80

EQUINOX BATT EQX2 BATT

Бренд: Salicru Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды