LG LG A1C-V5 Series Скачать руководство пользователя страница 61

Страница: 61 / 108

Electronics

AC Module System Installation Manual

Rev. 1.0

Step 7. Design the Array in EnerVu2 using a laptop or a desktop

( It is not available on the mobile application )

A. Click “Go to Design”.

B. Choose a background image in order to decorate the array builder. You can adjust the opacity, scale, and rotation

of the selected image. If you don’t want to put it on the background of ‘Array Builder’, you can skip it.

C. Edit the modules by using shortcut keys and edit tools to describe the AC module system. After rotating an array,

please adjust the position of the array then save the changes. It might be possible that the array after rotation is

overlaid on another array.

D. You can design arrays that will be presented in the system of the dashboard. After creating an array for AC

modules, drag the MAC on the array for mapping. The maximum allowable number of AC modules is 600. If you

want to register more than 600 AC modules, please create multiple systems on the website.

E. Confirm whether all MAC addresses and AC modules are properly placed with a reference of ‘AC module

Installation map’.

F. Save and terminate the Array builder.

At Step 7, recommended display resolution of your laptop or desktop is 1680 × 1050 or higher. If it is

lower than 1680 × 1050, it might be uncomfortable to build an array because you have to scroll the

window to the right or left.

After rotating an array, please adjust the position of the array then save the changes. It might be possible

that the array after rotation is overlaid on another array.

Array build step is only available on the website. Mobile application does not provide the tool for editing

arrays.

Hold the MAC.

Then drag it on the array

Содержание LG A1C-V5 Series












































































































Результаты поиска

Содержание LG A1C-V5 Series

Отзывы:

LG LG A1C-V5 Series, Руководство по установке, Страница: 61 / 108

Результаты поиска

Содержание LG A1C-V5 Series

Отзывы: