Function access control
What it does
FTP Function
This controls access to the Scan to FTP function.
Held Jobs Access
This protects access to the Held Jobs function.
PictBridge Printing
This controls the ability to print from an attached PictBridge
‑
enabled digital camera.
Note:
Selected devices only.
Release Held Faxes
This controls the ability to release (print) held faxes.
Use Profiles
This controls access to profiles, such as scanning shortcuts, workflows, and eSF
applications.
Function access control
What it does
New Solutions
This controls the initial security profile of each solution
‑
specific access control
installed on the printer.
Solution 1–10
The Solution 1 through Solution 10 access controls can be assigned to installed eSF
applications and profiles created by LDSS. The access control for each solution is
assigned in the creation or configuration of the application or profile.
Note:
Depending on the solutions you have installed, additional solution
‑
specific access controls may be listed below
solutions 1–10. Use these additional access controls if they are available for your installed solutions. If no additional
solution
‑
specific access controls are available, then assign one of the ten numbered access controls to each solution
you want to protect.
Understanding the home screen
The screen located on the front of the printer is touch
‑
sensitive and can be used to access device functions and navigate
settings and configuration menus. The home screen looks similar to this (yours may contain additional icons):
@
Status/
Supplies
Ready.
Copy
Release Held
Faxes
FTP
Search
Held Jobs
Held jobs
Touch
on the lower right to access settings and configuration menus for the device.
Note:
Access to device menus may be restricted to administrators only.
Appendix
69
