d
Press
again to select
Auto Answer
.
e
Press the arrow buttons to scroll to
Off
, and then press
.
2
When the telephone rings and you hear fax tones when you pick up the handset, press
on the printer or
*9*
on
the telephone attached to the printer.
Warning—Potential Damage:
Do not touch the cables or the and
ports while actively receiving a fax.
Tips:
•
The default code for answering faxes manually is *9*, but for increased security, you can change it to a number
that only you know. You can enter up to 7 characters for your code. The valid characters are the digits 0-9 and the
characters # and *.
•
Make sure that the telephone is plugged into the
port on the back of the printer and that the printer is connected
to the wall jack through the port.
Faxing FAQ
If I skipped the fax setup initially, do I need to run the installer again to set up the
fax?
You do not need to run the installer again. You can set up and configure the fax through the fax software that was
installed with the printer software:
1
Connect the printer to the telephone line. For more information, see “Setting up the printer to fax” on page 65.
2
Configure the fax settings using the fax software. To access the fax software:
For Windows users
a
Click
or
Start
.
b
Click
All Programs
or
Programs
, and then select the printer program folder from the list.
c
Click
Printer Home
>
Fax
tab >
Set up the printer to fax
.
d
Run the Fax Setup Wizard. Make sure you select the correct telephone service and connection. The wizard
configures optimal fax settings based on your connection.
For Macintosh users
a
From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
b
Double-click
Printer Settings
or
Fax Setup Utility
.
c
Configure the fax settings.
What is a splitter and what type of splitter should I use?
If there are limited wall jacks in your home or limited ports on your adapter, then you can use a phone splitter. A splitter
splits the telephone signal and allows you to connect multiple devices to the wall jack. It has two or more ports where
you can plug the devices. Do
not
use a line splitter.
To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial
tone.
Faxing
82
