detecting window should face the detection range.
◇
Avoid installing the unit on metal base;
◇
Avoid installing the unit where sun shine or temperature change obviously, for example: air conditioning, heater
etc.
Wireless door magnetism LX-DM1
1.specification
①
power:DC12V A23 battery
②
static current: 0
μ
A emission current: <8mA
③
remote control distance:
≥
30m(wide place)
2.function
①
it transmit the signal of the door/ window
’
s opening or closing to the main;
②
Tamper design: Under the condition that the triangle on emitter aims at triangle on magnetism, when the battery
lid is removed, it will emit signal to the main.
3.operate
①
Set its coding by DIP switch;
②
Wireless setting: enter
“
set wireless zone
”
in setting mode, the triangle on emitter aims at triangle on magnetism,
put away the magnetism or emitter to make it emit signal, and the main will give 1 DI sound, setting
successfully.
4.Installation attention
◇
Install magnetism and emitter on upright position of door lock, the distance between them is 3mm~5mm and
triangle on emitter aims at triangle on magnetism(like left following figure);
◇
The magnetism should be on the left of the emitter (like right following figure).
3 m m ~ 5 m m
correct using
incorrect using