（
4
）
set wireless zone:
The wireless zone can control the main only after setting.
Operation program
Voice prompt /LED state
2 0-9(zone) :set to indoor zone
:set to outdoor zone
*
:set to fire or 24HR zone
# : set to medical zone
And then trigger the wireless detector emit
signal to the main. 1 DI sound will be heard and
setting successfully.
Example
Result and remarks
2 1
Sense the LX-AL8 and make it emit signal. 1 DI
sound will be heard. So this LX-AL8 is set to No.1
zone and is outdoor zone
Set wireless zone attention:
◇
If the zones having set need to set another type, at first you should delete the zone having set and then set to
another type.
◇
If the coding of the zone needing set is same as the coding of zone having set, during setting
“
DiDi
…”
sound will
be heard, and the numerical LED display the zone number Having set, the zone can not be set. Here you can
revise its coding or delete the zone having set and then re-set).
（
5
）
delete wireless zone
Operation program
remarks
2 0-9(zone) 0
Delete wireless zone
（
6
）
resume deleted wireless zone
Operation program
remarks
2 0-9(zone) 1
Resume deleted wireless zone
（
7
）
wireless zone time-delay setting
Operation program
remarks
2 # 0-9(zone) 0
（
0sec
）
1
（
10sec
）
2
（
20sec
）
Set the time-delay from wireless zone is triggered
to the main start alarm
（
8
）
set wired zone
Operation program
remarks
3 1-4(zone) : set to indoor zone
set to outdoor zone
*
: set to 24HR zone
Set the type of wired zone having
connected with the main
NOTE: No.1 zone is the main
’
s sensor.
（
9
）
delete wired zone
Operation program
remarks
3 1-4(zone) 0
Delete wired zone
（
10
）
resume deleted wired zone
Operation program
remarks
3 1-4(zone) 1
Resume deleted wired zone
（
11
）
wired zone time-delay setting
Operation program
remarks
3 # 1-4(zone) 0
（
0sec
）
1
（
10sec
）
2
（
20sec
）
Set the time-delay from wired zone is triggered to
the main start alarm
（
12
）
set remote controller
the remote controller can control the main only after setting.
Operation program
Voice prompt /LED state
4 1-4 #
And then press the emitting key, 1 DI sound will
be heard and setting successfully.
Set remote controller attention:
◇
You can set 4-group remote controllers with different coding.
