◇
If the remote controllers having set need set to another number, you should delete the remote controllers having
studied and then set again.
◇
If the coding of the remote controllers needing set is same as the coding of remote controllers having set, during
setting
“
DiDi
…”
sound will be heard, and the numerical LED display the remote controllers number having set, the
remote controllers can not be set. Here you can revise its coding or delete the remote controllers having set and
then re-set).
（
13
）
delete remote controller
Operation program
Voice prompt /LED state
4 1-4 0
2 DI sounds confirm deleting
（
14
）
Tel path trouble alarm setting
Operation program
remarks
5 2 0
（
OFF
）
1
（
ON
）
set whether the main will alarm or not when the
phone path has trouble. When set this alarm
ON, 2 DI sounds will be heard every 20sec
when path trouble occurred.
（
15
）
dial-up mode setting
Operation program
remarks
5 3 0
（
pulse
）
1
（
tone
）
Set pulse/ tone dial-up mode
（
16
）
speech information record:
you can pre-record the speech content
（
4 sects at most
）
Operation program
6 1 indoor zone record
（
example: here status occur, please succor
）
2 outdoor zone record (example: robber enter, please call the police)
3 fire alarm or 24HR zone record( example: fire occur, please succor)
4 medical zone record
（
please call ambulance
）
Voice prompt/LED state
1 DI sound prompt you start recording, facing the main leaves the words, 1 DI sound prompt
record time over. After record finished, The recorded content will be played automatically
once.
NOTE:
◇
record time default is 5sec, if you want to keep on recording, you should press and
hold the key. The record time is 15sec.
◇
the system only save the last recorded content of every sect.
（
17
）
play all records
Operation program
Voice prompt/LED state
6 5
Example, the main will play in turns:
here status occur, please succor
（
numeric LED display
”
1
”
）
;
robber enter, please call the police
（
numeric LED display
”
2
”
）
;
fire occur, please succor
（
numeric LED display
”
3
”
）
;
please call ambulance
（
numeric LED display
”
4
”
）
.
（
18
）
disarm
Operation program
Voice prompt/LED state
7
2 DI sound will be heard
（
19
）
modify operate password
Operation program
Voice prompt/LED state
8
You need input same new password (4-bit) twice,
after inputting the numeric LED will display the new
password once.
（
20
）
away arm
Operation program
Voice prompt/LED state
0
（
quick arm
）
1
（
delay arm
）
Quick arm: 1 DI sound enter arm state, AWAY LED
light.
delay arm: numeric LED flash, AWAY LED light,
after 60sec, 1 DI sound enter arm state
