（
21
）
home arm
Operation program
Voice prompt/LED state
1 DI sound enter arm state, HOME LED light.
（
22
）
wired zone inaudible/audible alarm setting
Operation program
remarks
9
1 1-4 0 inaudible alarm
1 audible alarm
Set whether the main give alarm sound or not
when wired zone is triggered.
（
23
）
wireless zone inaudible/audible alarm setting
Operation program
remarks
9
2 0-9 0 inaudible alarm
1 audible alarm
Set whether the main give alarm sound or not
when wireless zone is triggered.
（
24
）
set whether the main dial or not when wired zone be triggered
Operation program
remarks
9
3 1-4 0 dial OFF
1 dial ON
set whether the main dial or not when wired zone
be triggered
（
25
）
set whether the main dial or not when wireless zone be triggered
Operation program
remarks
9 4 0-9 0 dial OFF
1 dial ON
set whether the main dial or not when wireless
zone be triggered
（
26
）
re-memorize wired zone
’
s state
Operation program
Voice prompt/LED state
9 5
1 DI sound confirm.
Special attention: if the main alarm immediately
after counting down 9,8,7
…
1( the wired detectors
have been triggered falsely), here you need disarm
the system, and ensure wired zones not be
triggered. Then according to this method
re-memorize all wired zone
’
s state.
Interior PCB configure
1. DC12V power output terminal, do not use the terminal for power
supply as possible as you can,
2. Phone line jack: provide for out-connect automatic dial-up for help;
3. DC power input terminal, connect with power adapter.the adapter
requires: input 220VAC, output 12VDC, and current 1000mA.
During AC power is on, standby battery will be charged
automatically. When AC power cut off, the product works by
standby battery entirely.
4. Standby power jack;
5. Connect wired fittings, please reference the instruction of
out-connect wired fittings;
6. CPU 7. Speech module
8. Receiving module; 9. Adjustable inductance
9
8
5
4
3
2
1
7
6
