LEXIBOOK DJ290SW, Инструкция по эксплуатации

Страница: 23 / 104

23
ENGLISH
1. Turn on your video camera.
2. Press the Mode key to switch to capture mode (the icon appears on the screen).
3. Use the LCD screen to compose your shot.
4. Press the Shutter button to take the photograph.
Note:
• The number of pictures you have space for on your memory card (memory capacity) is
displayed on the screen and automatically decreases by one each time a picture is taken. The
words “Memory Full” will appear when there is no space left on your memory card.
• When there is insufficient light, press the Right / LED key to turn the compensating lamp on.
Press the key again to switch it off.
• Do not remove the memory card or batteries while the video camera is saving or the image
may be lost.
Using the self-timer and burst snapshot
The self-timer sets a delay from the time the Shutter button is pressed to the time the picture is
taken. The burst snapshot takes three pictures continuously.
1. To set the self-timer and burst functions, turn the camera on and set to capture mode using
the Mode key.
2. Use the Left key to select the self-timer mode: each time the key is pressed the icon in the
upper left corner changes.
TAKING PICTURES (capture mode)
Off: takes pictures immediately.
2 seconds: the shutter release will delay for two seconds.
10 seconds: the shutter release will delay for 10 seconds.
Burst snapshot: press the Shutter button once to take three pictures continuously.
Note: You can also set the self-timer and burst snapshot using the Capture menu.
Using the zoom function
The digital zoom moves in or out using the W (wide angle) and T (telephoto) keys.
1. Turn the video camera on and set it to capture or video record mode using the Mode key.
2. Press the W or T button to compose the image. The level of magnification is displayed on
the screen.
3. Press the Shutter button to capture the picture.
RECORDING AUDIO FILES
Screen in audio mode:
1. Turn the video camera on and use the Mode key to choose audio record mode.
2. Press the Shutter button to start recording. To pause, press the Up key; press the Up key
again to continue.
3. Press the Shutter button to end the recording. The recording will stop automatically if the
memory is full.
Note: The length of the recording will be displayed on the screen while recording.
Audio record mode
The time of record
Memory card inserted
Battery level indicator
Full
Half
Low
Empty
Memory capacity