Leviton Z-MAX r24sd, Руководство пользователя

Страница: 85 / 93

, Configuration of Master Control Panel
Z-MAX Remote Relay Panel User Guide, Revision A 8/2005
PK-93194-10-00-0A
Page 79
cabinet, please reference the instructions contained at our
website, www.leviton.com and in your master control panel user
guide. Additionally, for this purpose, your PC requires additional
software and drivers which must be downloaded from our
website.
Once connected to the relay panel via USB and you have the
terminal program open at the Z-MAX prompt, there are several
settings which can be set to affect operation of master/slave
cabinets. From the terminal prompt, the command ’help’ (without
quotes) can be used at anytime to list out all commands and their
syntax. Note that not all settings are applicable to remote panels.
•
MRN Code - sets the MRN code determining the starting relay
for this panel. This is usually the only option you’re going to
need to set for Remote relay panels. A table of MRN codes and
their corresponding starting relay number can be found on
page 77.
•
MRE Code - The setting is only used in Master panel
configurations to set the number of external relays. On slave
cabinets this should always be set to 0, the default setting
•
MRI Code - Set the number of local (or internal) relays to the
cabinet. This should be set to the maximum number of relay
module positions in the cabinet.
Configuration of Master Control
Panel
Enable Master/Slave Communication
Configuration of the master control panel can be performed from
the LCD. There are three settings which need to be set on the
Master Control panels to enable Master/Slave Communication
•
Remote Relay (RMT RLY) Setting, to enable Master/Slave
communication
•
Number of Local Relays (LOC RELAY) if a setting other than the
default of (48) is required
•
Set the Remote Node ID of the Mater panel to indicate that it is
a master (MAS).
WEB
VERSION