Leviton Z-MAX r24sd, Руководство пользователя

Страница: 45 / 93

Feed and Load Wiring, Control Electronics Power Wiring
Z-MAX Remote Relay Panel User Guide, Revision A 8/2005
PK-93194-10-00-0A
Page 39
To connect your relay cabinet’s control electronics to power,
please follow the following steps:
Step 1:
Connect the relay cabinet to the circuit breaker panel
using conduit
Step 2:
Remove all debris
Step 3:
Run a dedicated circuit from the circuit panel or
distribution panel to the relay panel for the control
electronics. Make sure the power is off at the
breaker.
Step 4:
Wire the circuit as shown below
Step 5:
Connect the circuit ground wire to the relay cabinet
Step 6:
Keep the circuit off until all wires are terminated,
tested, and double checked
4 Relay Panel Control Electronics Power Wiring
Control
Power
Input
277VAC (347V on 347V models)
120VAC
Neutral
13W Required
Control Input Power
WEB
VERSION