Leviton Z-MAX r24sd, Руководство пользователя

Страница: 10 / 93

Page 4
Conduit Entry Locations
The cabinets have been designed with specific locations
supporting conduit entry for line and low voltage circuits. There
are specific areas of the cabinet which are restricted from some
or all types of conduit access. Reference the Physical Installation
section of this manual for specific details.
Line & Load Circuit Wiring
Each relay requires line & load circuit wiring. The line wiring
should come from an over-current device and the load circuit
wiring shall go to the specific load to be controlled. On some
models which have integrated branch circuit protection, the line
side of the relay has been pre-wired to a circuit breaker. With
these products, only the load side of the circuits needs to be
connected.
Turn On
Prior to turn on, verify the following is installed correctly:
•
Feed wiring
•
Load wiring
•
Control wiring
WEB
VERSION