Leviton Z-MAX r24sd, Руководство пользователя

Страница: 53 / 93

Master/Remote Network Interconnection,
Z-MAX Remote Relay Panel User Guide, Revision A 8/2005
PK-93194-10-00-0A
Page 47
Termination
All CAN based networks must be terminated at both ends. The Z-
MAX Master/Slave network is no exception.
Each panel has a termination jumper. When a relay panel is the
last panel on the run, it’s termination jumper must be installed.
Unlike some other wiring systems, Category 5
networking wiring requires that the connectors
at both ends of the cable be wired the same.
RJ-45 connectors must be "crimped" onto the
end of your Category-5e cable in order to
successfully make your connections. This requires
a special tool made specifically for this purpose
called an "RJ-45 Crimper" or other similar
terminology. Always use one of these crimpers
when making these connections. Read and
understand the instruction by the crimpers
manufacturer prior to use. Leviton offers a
crimper as Leviton part number 47613-EZC.
WEB
VERSION