Leroy-Somer E27 Series, Установка и обслуживание

Страница: 23 / 112

6 / 31
2.4. General characteristics:
Model EVO-01 EVO-01
SE
EVO-02 EVO-02
SE
EVO-03 EVO-03
SE
EVO-04 EVO-04
SE
EVO-05 EVO-05
SE
Static torque
(-15%, +50%) [N·m]
2x200 2X250 2x450 2x550 2x800 2x900 2x1100 2x1300 2x2000 2x2300
Dynamic torque
(-0%, +50%) [N·m]
2x200 2X250 2x450 2x550 2x800 2x900 2x1100 2x1300 2x2000 2x2300
Maximum speed [r.p.m]
620 764 637 350 350
Nominal air gap [mm]
0.20/0.40
0.20/0.40 0.20/0.40 0.20/0.40 0.20/0.40
Maximum admissible air
gap [mm]
0.55
Over-excitation NO Sí NO SI NO SI NO SI NO SI
Voltage [V
DC
] 207 207/104 207 207/104 207 207/104 207 207/104 207 207/104
Resistance [Ω]
690 333 504 210 306 200 231 133 133 80
Connection PARALELO
Power
[W]
2X62
2x
(128/32)
2x85
2x
(204/51)
2x140
2x
(214/54)
2x185
2x
(322/81)
2x322
2x
(535/135)
ED
0.5
Sound Level [dB] < 55 dB (A) a 1 m
Maximum ambience
Temp [ºC]
40
Maximum voltage to
operate detectors
(micro-switches)
30 V
DC
(Mechanical detector) / 24 V
DC
(Optical detector)
Maximum intensity for
detectors (micro-
switches) to operate
0,1 A (Mechanical detector) / 15 mA (Optical detector)
Peso [Kg] 23 29 39 54 113
Exam type CE
2014/33/EU
(Annex IV A)
EN 81-1:1998+A3:2009
EN 81-20:2014
EN 81-50:2014
TRI/DAS.IV-
A.000001/16
TRI/DAS.IV-
A.000002/16
TRI/DAS.IV-
A.000003/16
TRI/DAS.IV-
A.000004/16
TRI/DAS.IV-
A.000005/16
System to ensure quality
according to 2014/33/UE
(Annex VII)
77600150004
Table 3
2.5. Available toothing:
The following table shows the standard toothing of the EVO range brake discs:
DIN
5480
d
B
[mm]
55 60 65 75 85
m
2 3 3 3 3
z 26 18 20 24 27
Pressure angle[º]
30
Tolerance
7H
Table 4
For measurements different from the above table, consult ALZOLA.
You must ensure that the toothing is sufficiently robust for the
requirements of the application.
7 / 31
2.6. Product reception:
The type of packaging may vary according to the brake model and the shipping batch.
Fig. 4
2.7. Warranty:
Unless there is a specific agreement with the client, the terms of Warranty shall be the general
ALZOLA terms, set in the quotation conditions.
Any modification or manipulation carried out on the brake without the express authorization of
ALZOLA, as with any use not complying with the technical specifications set by ALZOLA, shall lead
to the suppression of the Warranty and the annulment of ALZOLA’s liability with regard to the non-
conformity.
2.8. Legal regulations:
UNE-EN 81-20/50: 2014: Safety rules for the construction and installation of lifts. Part 1: electric
lifts.
In order for the brake to conform to the directive 2014/33/UE, the integrator must respect the
general implementation and use conditions defined in the CE type certificate exam established by
the notified body.