Leroy-Somer E27 Series, Установка и обслуживание

Страница: 29 / 112

12 / 31
Tools to be used:
Allen Keys
Torque wrench
Installation Process:
EVO brakes may be factory supplied with the lever, but if this is not the case, and installation was
required by the client, the following procedure should be observed:
Following a mechanical and electric installation of the brake
1- Remove the central caps from the brake:
Fig. 10
2- Lubricate the threads of the lever axle and the screwed hub. Position the axial roller and clamp
the handle to the screwed hub using the three screws.
Fig. 11
13 / 31
3- Position the above set in one of the open holes after removing the caps.
Fig. 12
4- Turn this, screwing the end in the mobile plate as far as it will go.
The right hand lever is screwed in clockwise, and the left hand lever is
screwed in anticlockwise.
Fig. 13