Leroy-Somer E27 Series, Установка и обслуживание

Страница: 38 / 112

22 / 31
2. Disconnect the power cables of the brake and the detectors.
3. Remove the fixing screws of the brake and extract it.
Fig. 28
4. Extract the disc to be replaced. In the diagram find the series number and model. With this data
request a replacement from ALZOLA.
5. Reassemble the brake according to the instructions in section 3.3 and the following sections.
6. Remove the shipping screws, and, in the holes, insert the initially removed caps again.
7. Following the disc replacement check the detectors work correctly (section 6.2), adjust them if
necessary (section 7.2).
7.2 Replacement and adjustment of detectors (micro-switches):
Danger of lift falling: During the operation described in this section the brake
will be released allowing the uncontrolled movement of the cabin.
Danger of entrapment.
The reference for the mechanical detector is D2SW-01MS by OMRON©.
The references for the standard optical detectors mounted on EVO brakes
are EE-SX950-R (NPN) and EE-SX950P-R (PNP), both by OMRON©.
Tools:
Allen Keys.