9300 Servo PLC
Preface and general information
1-1
l
ServoPLC EN 2.0
1
Preface and general information
1.1
About this Manual
This Manual describes the system block functions which can be selected and parameterised in the
control configuration of the
Drive PLC Developer Studio
(DDS) for
9300 Servo PLC
1.1.1
Conventions used in this Manual
This Manual uses the following conventions to distinguish between different types of information:
Information type
Distinction (in text)
Example
System block name
bold
The
DIGITAL_IO
...
System block variable identifier
italics
The input
DIGIN_bIn1_b
...
Tip!
For information about the conventions used for variables of Lenze system organisation units,
function blocks and functions can be obtained from the appendix of the DDS online documentation
“Introduction into IEC61131-3 programming”. The conventions ensure universal and uniform
labelling and support the readability of PLC programs.
1.1.2
System block descriptions
All system block descriptions given in this Manual have the same structure:
Headline with SB identifier
SB function and module number
Short description of the SB and its most important features
System block chart including all corresponding variables
•
Input variables
•
Output variables
Table giving information about input and output variables:
•
Identifier
•
Data type
•
Signal type
•
Address
•
Display code
•
Display format
•
Info
Detailed SB description
efesotomasyon.com - Lenze
Show/Hide Bookmarks
