Lenovo ThinkSystem ST550, Руководство по установке

Страница: 94 / 136

Figure 55. Power interface board installation
Step 1. Insert the hole in the power interface board into the corresponding mounting stud on the chassis.
Then, gently move the power interface board downward so that it is engaged with the mounting
stud.
Step 2. Install the screw to secure the power interface board in place.
Install a hot-swap power supply
Use this information to install a hot-swap power supply.
“ Read the
installation
Guidelines” on
page 58
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 59
The following tips describe the type of power supply that the server supports and other information that you
must consider when you install a power supply:
• The standard shipping has only one power supply installed in the server. For redundancy and hot-swap
support, you must install an additional hot-swap power supply. Certain customized models might be
shipped with two power supplies installed.
• Ensure that the devices that you are installing are supported. For a list of supported optional devices for
the server, go to:
http://www.lenovo.com/us/en/serverproven/
Notes:
– Ensure that the two power supplies installed on the server have the same wattage.
90
ThinkSystem ST550 Setup Guide