Lenovo ThinkSystem ST550, Руководство по установке

Страница: 27 / 136

Rear view of server models with two hot-swap power supplies
Figure 8. Rear view of server models with two hot-swap power supplies
Table 5. Components on the rear of server models with two hot-swap power supplies
Callout Callout
1
Power supply 1
2
Power supply 2 (available on some models or available
as an option)
3
USB 2.0 connectors (2)
4
USB 3.0 connectors (2)
5
XClarity Controller network connector
6
USB 2.0 connectors (2)
7
Ethernet connectors (2)
8
VGA connector
9
NMI button
10
Serial-port-module slot
11
PCIe slot 1
12
PCIe slot 2
13
PCIe slot 3
14
PCIe slot 4
15
PCIe slot 5
16
PCIe slot 6
1 Power supply 1
2 Power supply 2 (available on some models or available as an option)
The hot-swap redundant power supplies help you avoid significant interruption to the operation of the
system when a power supply fails. You can purchase a power supply option from Lenovo and install the
power supply to provide power redundancy without turning off the server.
On each power supply, there are three status LEDs near the power cord connector. For information about the
status LEDs, see “Rear view LEDs” on page 24.
3 4 6 USB connectors
Used to attach a device that requires a USB 2.0 or 3.0 connection, such as a keyboard, a mouse, or a USB
flash drive.
Chapter 2
.
Server components
23