Lenovo ThinkSERVER TS130, Руководство по техническому обслуживанию аппаратной части

Страница: 19 / 128

Symptom Error FRU/Action
3 short beeps and 1 long beep Memory not detected
Perform the following actions in order:
1. Make sure that the memory
module(s) are properly seated in
the connector(s).
2. Replace the memory module(s).
3. Replace the system board.
2 short beeps Common POST error Indicates that an error has occurred
during the POST.
POST error codes
Each time you turn on the system, it performs a series of tests that checks the operation of the system and
options. This series of tests is called the
power-on self-test , or POST .
The POST performs the following operations:
• Checks some basic system board operations
• Checks the memory operation
• Checks the video operation
• Verifies that the boot drive is working
If the POST detects a problem, an error message will be displayed on the screen. A single problem can
cause several error messages. When you correct the cause of the first error message, probably the other
error messages will not be displayed the next time you turn on the computer.
POST error code POST error message Description/Action
00CE Machine Type or Serial Number is INVALID This error message is displayed when the machine
type or the serial number is invalid.
0210 Stuck key This error message is displayed when a key is kept
pressed for a long time.
0211 Keyboard not found This error message is displayed when there is no
keyboard detected.
0135 Fan failure The system might be overheating.
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
Note: If the problem is caused by the
microprocessor fan, pressing F10 will not solve
the problem.
0164 Memory size decreased This error message is displayed when the memory
size has decreased.
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
Chapter 3
.
Diagnostics and troubleshooting
15