Lenovo ThinkSERVER TS130, Руководство по техническому обслуживанию аппаратной части

Страница: 103 / 128

• Return to step 2 to delete additional RAID volumes.
• See “Creating RAID volumes” on page 98 for RAID volume creation.
• Use the up and down arrow keys to select Exit and press Enter.
Resetting disks to non-RAID
This section describes how to reset your hard disk drives to non-RAID.
To reset your hard disk drives to non-RAID, do the following:
1. Press Ctrl+I when prompted to enter the Intel Matrix Storage Manager option ROM configuration utility
during system startup.
2. Use the up and down arrow keys to select Reset Disks to Non-RAID and press Enter.
3. Use the arrow keys and the space key to mark individual physical hard disk drives to be reset, and then
press Enter to complete the selection.
4. When prompted, press Y to confirm the reset action.
5. After resetting the hard disk drives to non-RAID, you can:
• See “Deleting RAID volumes” on page 98 for RAID volume deletion.
• See “Creating RAID volumes” on page 98 for RAID volume creation.
• Use the up and down arrow keys to select Exit and press Enter.
Updating the firmware
The firmware in the server is periodically updated and is available for download on the Lenovo Support
Web site. Go to http://support.lenovo.com to check for the latest level of firmware, such as the BIOS
ROM file and RAID FW files.
When you replace a device in the server, you might have to either update the server with the latest version of
the firmware that is stored in memory on the device or restore the pre-existing firmware from a diskette or
CD image.
• The BIOS ROM file is stored in flash on the system board.
• The onboard SATA software RAID firmware is integrated into the BIOS ROM on the system board.
The Ethernet firmware is downloadable at http://support.lenovo.com.
Using the EasyUpdate Firmware Updater program
ThinkServer EasyUpdate Firmware Updater is a software application that enables you to maintain your
system firmware up-to-date and helps you avoid unnecessary outages. Firmware Updater updates the
server system and adapter firmware.
To update your system, do the following:
1. Go to http://support.lenovo.com.
2. Click Download & Drivers
➙
ThinkServer and then follow the instructions on the Web page to
download the ISO image for the EasyUpdate Firmware Updater program.
3. Burn the ISO image to a disc.
4. Set the optical drive as the first boot device and insert the disc into the optical drive. The server will
proceed directly to the User Interface Application’s introductory screen.
5. Read the messages and instructions displayed on the introductory screen. Then, click Next to proceed
to the list of firmware updates available on the optical media.
Chapter 7
.
Configuring the server
99