Lenovo ThinkSERVER TS130 Скачать руководство пользователя

Страница: 107 / 128

Appendix A. Information resources

You can use the information in this appendix to access useful resources relating to your computing needs.

Safety and Warranty

The

Safety Information

and the

Warranty and Support Information

at http://support.lenovo.com contain

information on safety, setup, warranty, and notices. Read and understand all safety information before
using this product.

Lenovo Web site (http://www.lenovo.com)

The Lenovo Web site provides up-to-date information and services to help you buy, upgrade, and maintain
your computer. You can also do the following:

• Shop for desktop, workstation, and notebook computers, monitors, projectors, upgrades and accessories

for your computer, and special offers.

• Purchase additional services, such as support for hardware, operating systems, application programs,

network setup and configuration, and custom installations.

• Purchase upgrades and extended hardware repair services.

• Download the latest device drivers and software updates for your computer model.

• Access the online manuals for your products.

• Access the Lenovo Limited Warranty.

• Access troubleshooting and support information for your computer model and other supported products.

• Find the service and support phone numbers for your country or region.

• Find a Service Provider located near you.

Lenovo Support Web site

Technical support information is available on the Lenovo Support Web site at:
http://www.lenovo.com/support

This Web site is updated with the latest support information such as the following:

• Drivers and software

• Diagnostic solutions

• Product and service warranty

• Product and parts details

• User guides and manuals

• Knowledge base and frequently asked questions

103

Содержание ThinkSERVER TS130

































































































































Результаты поиска

Содержание ThinkSERVER TS130

Отзывы:

Похожие инструкции для ThinkSERVER TS130

Бренды по названию

Популярные бренды

Lenovo ThinkSERVER TS130, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkSERVER TS130

Отзывы:

Похожие инструкции для ThinkSERVER TS130

Бренды по названию

Популярные бренды