Lenovo ThinkServer RD120, Руководство по техническому обслуживанию аппаратной части

Страница: 192 / 232

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, ThinkServer RD120 Machine Types 6444, 6445, 6446, and 6447,” on page 25
to determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
166-070-000 System Management: Failed.
Unable to communicate with Remote
Supervisor Adapter II SlimLine.
1. Update the firmware (BIOS, service processor,
diagnostics) to the latest levels.
2. Run the diagnostic test again.
3. Correct other error conditions (including failed
systems-management tests and items that are
logged in Remote Supervisor Adapter II SlimLine
system event/error log) and run the test again.
4. Disconnect all power cords and external cables
from the server, wait 30 seconds, reconnect the
power cords and cables, and run the test again.
Attention: In a dc power environment, only
trained service personnel other than Lenovo
service technicians are authorized to connect or
disconnect power to the dc power supply. See the
documentation that comes with each dc power
supply.
5. Reseat the Remote Supervisor Adapter II
SlimLine.
6. Replace the Remote Supervisor Adapter II
SlimLine.
166-198-000 System Management: Aborted.
1. Run the diagnostic test again.
2. Correct other error conditions (including failed
system management tests and items logged in
the BMC error log and the system event/error log)
and retry the test.
3. Disconnect all server and optional-device power
cords from the server, wait 30 seconds, reconnect
the power cords, and retry the test.
Attention: In a dc power environment, only
trained service personnel other than Lenovo
service technicians are authorized to connect or
disconnect power to the dc power supply. See the
documentation that comes with each dc power
supply.
4. Replace the Remote Supervisor Adapter II
SlimLine, if installed.
5. (Trained service technician only) Replace the
system board.
166-250-000 System Management: Failed.
I
2
C cable is disconnected.
1. Reconnect the I
2
C ribbon cable between the
operator information panel assembly and the
system board.
2. (Trained service technician only) Replace the
system board.
174
ThinkServer RD120 server Machine Types 6444, 6445, 6446, and 6447: Hardware Maintenance Manual